Antirock Sway Bar Heim Joint (1/2 Inch-20 Stud Shortened to 7/8 Inch 1/2 Inch-20 Female RH Thread) RockJock 4x4 Drivetrain & Differentials - Transmissions & Shifters - Transmission Clutch and Flywheel Kit The ballast is not necessary

The ballast is not necessary if an MSD 6 or 7-series Ignition Control is being used with the points distributor

Capable of 130 PSI while providing significant flow forced induction applaications where belt driven pumps are normally used

tubing that is Double the Strength of the Factory Tubing to Handle more Abuse

1981-1986 Chevrolet C30 Fleetside

These are to be used with 12 volt systems only

Antirock Sway Bar Heim Joint (1/2 Inch-20 Stud Shortened to 7/8 Inch 1/2 Inch-20 Female RH Thread) RockJock 4x4 Drivetrain & Differentials - Transmissions & Shifters - Transmission Clutch and Flywheel Kit The ballast is not necessaryRockJock's 1 2 in. 20 right hand thread female heim joint with 1 2 in. 20 stud, shortened to 7 8 in.) as used in their Antirock sway bar kits. Zinc plated finish. Features: Antirock Sway Bar Heim Joint (1 2 Inch 20 Stud Shortened to 7 8 Inch, 1 2 Inch 20 Female RH Thread) Thread: 1 2 Inch 20 Thread Rotation: Right Hand Finish: Zinc Plated Sold As: Each